gear

DJI Osmo Mobile 2 smart phone gimbal Rio Grande test

DJI Osmo Mobile 2 smart phone gimbal Rio Grande test

I have been flying my DJI Mavic Pro drone all over New Mexico making dozens of 4K videos.  But what to do about places the drone cannot fly?  Or if I wanted to actually record the sound of the place I am recording video of?  The iPhone 8 records good 4K video, but if you just handhold it the video is all choppy.  In my search for a smooth solution, I discovered the DJI Osmo Mobile 2 smart phone gimbal.  However, it was sold out everywhere.  Finally it was back in stock and mine arrived just last week!

Read More

Jason gets a Jeep Renegade Trailhawk!

Jason gets a Jeep Renegade Trailhawk!

In my life a lot of rather big things happen rather suddenly.  For example, two weeks before I landed in Seoul, South Korea, I had never been abroad before, I was about to attend Claremont Graduate University's PhD program in California, and it had never crossed my mind to work overseas.  Not quite as dramatic as that, but in a similar fashion, getting a SUV to better match my work and personal lifestyle here in Albuquerque, New Mexico as a professional photographer and certified drone pilot, had only fluttered across my mind a few times.  I was not even sure if it would be possible as I still had payments left on my 2013 Mazda3 sedan, which I totally loved and had zero problems with in owning it for 42,000 miles.  

Read More

Photography Tip - own more than one camera bag

I use this camera bag when bringing my Nikkor 80-200mm f/2.8 lens along.You might have started out with just a DSLR body and a single lens, but chances are, as time has gone on you have accumulated a lot more photography gear.  So when people ask me what camera bag should I get, I usually answer, "you should actually get two bags."  A solid photography tip is definitely have more than one camera bag.  I have only two myself, and I could definitely use a third because neither of my bags can hold all my photography gear for a typical job in a single bag.  

The Lowepro Flipside 200 has been a great bag.  I can hold a lot in its very slim profile.  As you can see it can hold one DSLR body, a 70-200mm f/2.8 lens, a second medium sized lens, a speedlight, and hidden at the very bottom of the bag in a small compartment is a 50mm lens.  It also holds spare batteries, memory cards, camera cleaning equipment and a water bottle (very important!).

My traveling light camera bag is this Lowepro Nova 160 AWWhen I do not need to bring my long Nikkor 80-200mm f/2.8 lens, then I can often get away with just using my much smaller Lowepro Nova 160 AW bag.  Despite its small size, I can still fit a DSLR body, medium sized lens, speedlight and a 50mm lens plus memory cards and extra batteries, and the all important water bottle.  

Having these two camera bags provides great flexibility in how heavy or light I travelBasically, the amount of gear dictates how many bags you need and what sizes.  If you have a lot of gear and one big bag that can hold everything, I recommend getting a smaller bag for times you only need one lens with you.  Likewise, if you just have one big bag and it makes you not want to go out shooting as much because it is too heavy to lug around all the time, a second smaller bag is a must have.

How many camera bags do you have?

Nikon MC-30 Cable Release Review & Photography Tip

My own well-worn Nikon MC-30 cable release which is an essential piece of gear in my bagI am a very firm believer in having the right tools for the right job, and if you own a tripod, then you certainly should own a cable release as well.  Cable releases tend to only work with a select few DSLRs based on the connection the camera has.  The cable release for my Nikon D300 is the Nikon MC-30 which at the time retailed for $99, but thankfully Amazon.com had it for just $49 on sale.  It currently is priced at $55.61.  There are cheaper cable releases for other cameras and of course much more expensive ones with LCD screens and more functions.  For my $49 I got the most basic cable release you could get, a small rectangle of plastic with a shutter release button and a lock button.  That said, it does its job very well and I have gotten my money's worth out of it.

It just plain feels cool to use a cable release, like you are an old-time photographer.Why do you need a cable release if you already have your camera on a tripod?  Because the act of pushing the shutter with your finger can and will produce shake even with your DSLR on a stable tripod.  Using a cable release along with a tripod insures the most stable shooting method.  Plus, it just plain feels cool to use a cable release!  It will make you feel like an old-time photographer.  It is just another tool, along with a good tripod, that really, really helps you relax while out in the field making photographs.  

The lock button on the Nikon MC-30 helps when shooting in bulb modeThe one feature of the Nikon MC-30 cable release is its lock button, or rather switch on the side of the device.  Being able to lock the shutter open is very convenient when using bulb mode.  This way you do not need to keep the shutter pressed the entire time, you can just lock it.  When I photograph fireworks, I lock the shutter open allowing me to concentrate on blocking the front of the lens with a card.

The unique connector port for the Nikon MC-30 on my Nikon D300Refer to your particular's DSLR maker's website for which cable release will work with your camera because there are several different port connectors on cameras.  One complaint about the Nikon MC-30 is that connecting it is awkward due to the small line up point markings on it, but I actually always attach it blind because the bend of the cable naturally lines up with the pin connector!  Likewise, I never screw the cable onto the port, I just push it in and it has never popped off.

Even at its current price, the Nikon MC-30 can seem very expensive for essentially a piece of wire with a button on it, but I believe the value of having one and using it will definitely help your photography.

  • Read more gear reviews
  • More of Jason's photography tips
  • Take a 1-on-1 private DSLR Photography Lesson with Jason today!
  • Induro CT214 Carbon 8x Tripod & BHD2 Ballhead review

    Induro BHD2 ballhead on top of Induro CT214 carbon fiber tripod legs - $600 well spent - all product shots in this post by Jason Collin PhotographyPhotographer's say to buy the best tripod you can afford because you only ever want to buy one tripod.  If you go the cheap route, you will utimately end up spending more replacing the flimsy tripod you first bought with a proper, stable tripod eventually.  I can state that this is 100% true.  Now, if someone asks me what tripod should I get, I tell them the Induro CT214 carbon 8x legs with Induro BHD2 ballhead.  That is also something not widely known, the best tripods are bought in pieces, legs and head separately.  After a lot of research looking for a "no compromises" tripod, and by that I mean:  

    • very stable, light weight, made of carbon fiber, very easy to use, great build quality, taller than 5 feet without using extension column, collapses to a relatively small size for easy transport

    . . . I found the Induro CT214 with the Induro BHD2 ballhead to be the cheapest optioin that meets all the above requirements.  So exactly how much does the cheapest no compromises tripod I could find on the market cost?  $600 . . . and in the nine months I have been using it, it has been worth every penny.

    52.6" without column extended offers a very good height on the Induro CT214 legsIt also helped that Scott Bourne, a photographer I respect very much, recommended this tripod and proved it by switching from decades of using Gitzo tripods.  For those using lenses 70-200mm f/2.8 and smaller, the CT214 with BHD2 offer a very stable platform that is still light to carry.

    Induro BDH2 ballhead -- from left to right: tension knob, head rotation knob, ballhead release knobWhen first using a ballhead, it may take some getting used to.  Adjusting multi-lever tripod heads meant one lever moved the camera only one way.  With a ballhead, you can move the camera in any direction by loosening just one knob and than swiveling the camera any way you need.  

    The Induro BDH2 uses and comes with a standard Arca-Swiss mounting plateWhen you attached the Arca-Swiss compatible plate to the bottom of your camera (tool required) and then mount it to the ballhead via its vise-like grip, you feel absolutely sure of the connection.  Everything about it feels rock solid.

    Induro CT214 tripod leg features a built-in bubble levelA small bubble level built into the Induro CT214 legs helps make sure things are level especially when working on uneven ground, though I do not use it much when composing shots, instead using the grid lines in my Nikon D300's viewfinder to fine tune levelness.

    Induro CT214 has foam grips on all three legs for comfort holding & carryingEach carbon fiber leg had a foam grip for ease of holding and using the tripod in very warm or cold climates.  I find them to be most useful when carrying the tripod with my camera attached for providing cushioning on my shoulder.  

    Full Carbon 8x build quality is found in the Induro CT214 along with 1/2 turn only leg locksIt is easy to understand how a lighter, more stable and taller tripod would be easier and more comfortable to use.  These qualities of the Induro CT214 can be shown in the included photographs.  However, what made me love the tripod from the very first time I used it were the leg locks and the solid locking of the ballhead.  

    I was suspicious of turn style tripod leg locks being easy to use.  I thought, what could be easier than just flickind and shutting a clamp leg lock?  Well, only having to turn the leg locks 1/2 a turn before they slide gracefully down and then a 1/2 turn back to firmly lock them in place, that is much easier and a very elegant solution to extending and closing tripod legs.  

    Then the grip with which the BHD2 ballhead tightens means the camera does not move a few extra millimeters after you compose your shot.  That use to drive me crazy about using a flimsy tripod.  I get everything framed just right, lock the head, take my hands off the camera, only for the tripod head to creap down a little ruining my carefully composed shot.  In nearly all situations, the BHD2 eliminates this.  I did notice some ever so slight creep when using my large 105mm macro lens angled downwards.  For the most part, once you frame the shot, lock the ballhead, everything stays right in place.  I cannot tell you how much of a pleasure that makes using a tripod.  

    Basically, using a tripod like the Induro CT214 with Induro BHD2 ballhead feels like driving a luxury car, while using cheap & flimsy tripods feels like driving an economy rental car.  The price is steep, $600, but if you use a tripod for commercial work like I do, it is a no-brainer, and even if you do not make money from your photographs but love to make photos that require a tripod, the price I believe is still worth it.

    --Induro Product Page 

  • Read more gear reviews
  • More of Jason's photography tips
  • Take a 1-on-1 private DSLR Photography Lesson with Jason today!
  • JCP POLL: Have you ever broken a lens by dropping it?

     

    I was photographing a ribbon cutting this morning and there was another person there with a DSLR. As I was browsing a shelf full of super expense eyeglass frames, I heard a sound of glass smashing on the floor.  Naturally I thought someone had dropped some eyeglasses.  It was the woman's (Canon) lens, fallen clean off the camera body!  I have no idea how that could have happened.  The only glass that broke was that of her UV filter.  However, a portion of the front ring element was bent inward so unscrewing the remaining parts of the filter were not possible. 

     

    A few years ago I was teaching a DSLR Photography Lesson in downtown when someone with a big camera bag walked past.  About ten seconds later I heard a crash.  Her (Canon) lenses had fallen out because the bag was not closed all the way

     

    This is where I got the idea for today's poll question.  If the unfortunate has happened to you, please tell us the circumstances surrounding it in the comments below and if your lens(es) were able to be fixed.  If you have never had any lens break, also let us know why you think that is.

    BlackRapid RS-Sport Camera Strap Gear Review

    Gunslinger hip to eye shooting style demonstration using the BlackRapid RS-Sport strap system with a Nikon D300 & Nikkor 80-200mm f/2.8D - photo by PedroLet me start by just saying that the BlackRapid RS-Sport strap has made me excited about using my DSLR again because of just how cool it feels to slide the camera up and down the strap.  Readers of my movie reviews will know I am a big western fan, and I definitely feel like an old gunslinger when using my BlackRapid RS-Sport.  So this is the emotional part of the review, which is mostly what determines buying a certain product or not.  I decided to buy one even before I knew it would make me feel like a gunslinger.  Just trying a photo student's RS-7 strap for a few seconds instantly convinced me to free my neck from its burden and get a sane camera carrying system.

    For the ergonomics and practicality part of the review, the BlackRapid RS-Sport strap still gets a very positive gear report from me.  I have only had the RS-Sport for exactly two weeks, but I have already put it through many different shooting situations and it has performed great in all of them.  On a 2-day event shoot (5pm-8pm Friday; 9am-12am [yes 15 hours] Saturday) I got home early Sunday morning with zero shoulder pain.  Normally after only a few hours using my old Nikon Professional branded Optitech neck strap, I would have lingering sourness after a job.

    The effectiveness of the BlackRapid strap system comes from taking the weight off your neck because when do you ever carry anything around your neck ever besides for some reason a heavy DSLR?  Instead, the BlackRapid strap system puts the weight on your left shoulder like any other style of bag one carries.  It has to be your left shoulder too.  If you are left-handed like me and concerned because you usually carry everything on your right shoulder so your left hand has easy access to the bag, it immediately felt normal to me to have the BlackRapid strap on my left shoulder because you grab a DSLR with your right hand first anyway.  The grip on the DSLR body is designed for the right hand so do not be concerned about having to use it on your left shoulder, even if your are left-handed.

    Your camera on a BlackRapid strap can hide behind your hip in tight spots or can easily be held in front to squeeze through places.

    I chose the RS-Sport model for the extra bit of strap that goes under the armpit area for extra stability.  I have to admit I did think at first that this is not comfortable and maybe I should have just gotten the RS-7 which is similar to the RS-Sport but minus the underarm strapping.  However, in real world use and not hyper nitpicking when trying it on in one's house, I am definitely glad I got the RS-Sport because the main shoulder pad is more ergonomically tapered and the underarm strapping is not noticable to me anymore.  

    How anybody can use the first party straps that come with a DSLR is beyond me.  I immediately got a cushier Optitech neck strap, which sells for about $24.  Now I wish I had gotten a BlackRapid strap long ago.  The RS-Sport sells for $69.95 and the standard RS-7 for just $58.95.  There are several other styles, including a dual strap system for carrying two cameras!

    Take a 1-on-1 DSLR Photography Lesson with me and I will let you try out my RS-Sport strap for yourself! 

    --thanks to Pedro for taking these shots of me